BLIZZARD Snow Foam is intended for pre-washing vehicles, soaks and releases coarse dirt from the car, which can unnecessarily contaminate the washing tool during the subsequent wash or can be difficult to wash.
 
As such, pre-washing reduces the risk of scratches during the actual washing and makes the entire washing process very efficient. Pre-washing is most needed when the front part of the car is clogged with insects, the lower part of the sides of the vehicle with mud or salt and, last but not least, the rear part of the car. It is not necessary to apply a lot of the preparation, it is important to apply it evenly.
 
How to use:
The car should ideally be dry and cool
if the car is hot, you can cool it down by showering it with cold water, but if you don’t let it dry, you can reduce the effectiveness of  BLIZZARD SNOW FOAM
apply the product either locally directly to the contamination or to the entire car
leave it on for about 3-5 minutes the product must not dry out!
you can disturb the insects with a microfiber cloth dipped in the washing mixture rinse off the preparation and remaining dirt with a stream of water
continue washing ideally with our PURIFY SHAMPOO.
 
Top Tip:
Dilute 1:10 Mix with warm water